AdvancedHMI Software

General Category => Application Showcase => Topic started by: StephenSDH on April 07, 2014, 04:12:57 PM

Title: Concrete Line #1
Post by: StephenSDH on April 07, 2014, 04:12:57 PM

Posting my project incase it helps anyone.

Cheers, Steve


Software Video
https://www.youtube.com/watch?v=qJofwi_G94I

Hardware Video
https://www.youtube.com/watch?v=dDYur311a_0

Files
https://www.dropbox.com/sh/hl8hrjmlqod6rij/EDpDHCHv5U

Title: Re: Concrete Machine
Post by: Archie on April 08, 2014, 08:27:54 AM

Nice work! Thanks for sharing in much detail.

Title: Re: Concrete Machine
Post by: StephenSDH on April 08, 2014, 09:08:13 AM

Thanks for making to project available and for helping me out in the past. 

- Steve

Title: Re: Concrete Machine
Post by: TSLJon on April 11, 2014, 03:55:58 AM

Thank you!

Title: Re: Concrete Machine
Post by: mgaudio on July 14, 2014, 03:07:25 PM

How did you integrate the password into the program?

I am a begginner at this and would love your help.

Thankyou,
Michael A. Gaudio

Title: Re: Concrete Machine
Post by: StephenSDH on July 14, 2014, 04:46:29 PM

Michael,

I posted all the code for both the PLC and AdvancedHMI application. 

It is a little complicated if you are new to PLC and .Net programming.  The security validation is in the PLC logic.  The operator enters a numeric value through AdvancedHMI.  In the PLC confirms the entered password it turns on a bit.  The data entry control I modified only allows data entry if the PLC bit is true.

It might be a little too complicated, but I posted all the code if you want to copy it.

Good Luck,

Steve

Title: Re: Concrete Machine
Post by: DBTechServ on September 16, 2014, 11:14:37 AM

Steve - GREAT video of system. Seems to be well thought out and I like the added touch of making the drawings directly available to the operator.
Thanks for posting it.
David

Title: Re: Concrete Line #1
Post by: StephenSDH on October 05, 2016, 01:46:18 PM

Had some PMs to repost the code.  The project is fairly old at this point.  I would download the latest code and not use this, but here it is. 

https://www.dropbox.com/sh/cbk2slqdqg2jnei/AAAd9z5dd3q73mj88Jkq30wwa?dl=0