Topics

1

Support Questions / Modbus RTU network with delta PLC Schneider Altivar 12,Omron e5C Temp.Conroller

« on: December 18, 2020, 05:34:46 AM »

Hi, Archie
i am trying to set up Mdbus RTU network with  Altivar 12 VFD 1 Omron e5c Temp Controller ,delta PLC DVP 28SV11 and AHMI PC. My AHMI Communication setting is 19200 , 8N2 and addresses are  Node 1=AHMI, 2=DVP PLC 3 Altivar VFD and 4= Omron Temp controller. i cant read or write anything from any members of network. My wiring and comms. setting on every device is right.
i tried to communicate AHMI-delta PLC , AHMI to VFD, AHMI- Omron Temp. Controller. one to one individually
but i dint get any data on my digital Panel meter in AHMI.

My Questions are ,
1) is AHMI always master on the network.
2)On AHMI component's property (Digital Panel meter..etc)where i can enter the node number on network.
i can put Data Address but from which node we are getting it, i cant put in.

any help,

2

Open Discussion / Selection scroll down list compactlogix

« on: March 15, 2018, 11:30:06 PM »

Hi
I have compactlogix(with Eip module) having array of 20 string type members Containing job names to be sent to
Other Eip device. I want to creat scroll down list on AHMI  displaying  All members of string array and user can select one of them and Send it to current job tag (string) in plc.

How can I create such selection list in AHMI.

Thanks in advance.

3

Open Discussion / How to get connected with 3 Compactlogix in three different subnets

« on: March 10, 2018, 12:30:38 AM »

How to get connected with 3 Compactlogix in three different subnets .
i have three compactlogix PLCs on three different subnets. (1). 192.168.1.3   (2).192.168.2.3     (3). 192.168.3.3
all PLCs are routed by router to comunicate with each other. how can i receive/send data in one AHMI project. between all three?
any router gateway property to be set?

Thanks in advance. 

4

Open Discussion / Controllogix over DF1 Driver

« on: March 25, 2016, 10:57:55 AM »

Hi,Archie ,
How can we communicate with  Controllogix over Df1 for compact/controllogix with AHMI

5

Open Discussion / visual studio community 2015 installation stuck on .NET frame work

« on: February 20, 2016, 08:09:16 AM »

visual studio community 2015 installation stuck on .NET frame work

I am trying to install Visual Studio community 2015 on my laptop with win-7 premium home with 1 Gb ram.
I am stuck on "Microsoft.NET frame work 4.6.1 developer pack applying" for over 12 hours. I tried twice same thing.

appreciate any help.

6

Open Discussion / displaying data form ML1100 and SLC 500on same page (from different controllers)

« on: July 19, 2015, 09:43:38 AM »

Hi, Archie, i am using micrologix1100 over ethernet and slc 5/04 over DF1 driver and displaying  data from both controllers on same page, it works good for minute and error comes saying "An unhandled exception of type 'System.IndexOutOfRangeException' occurred in AdvancedHMIDrivers.dll" what could be the reason? and also want to know can i use AHMI like scada. means  is it possible to receive/send data to/from different PLCs working on different drivers of different manufactures.(like Allen Bradelly ,Omron and siemens in one application)

7

Support Questions / data from different controllers on same page

« on: July 19, 2015, 09:31:35 AM »

Hi, Archie, i am using micrologix1100 over ethernet and slc 5/04 over DF1 driver and displaying  data from both controllers on same page, it works good for minute and error comes saying "An unhandled exception of type 'System.IndexOutOfRangeException' occurred in AdvancedHMIDrivers.dll" what could be the reason? and also want to know can i use AHMI like scada. means  is it possible to receive/send data to/from different PLCs working on different drivers of different manufactures.(like Allen Bradelly ,Omron and siemens in one application)