Messages

1

Support Questions / Re: how to deal withe many MODBUS devices on the same Com Port ?

« on: September 26, 2023, 01:53:55 PM »

Hi Archie

Any solution to read two modbus devices on the same com port?

Thanks

2

Open Discussion / Re: Advenced HMI rs232 scale weighing

« on: September 11, 2023, 10:28:55 AM »

good morning
I was thinking of placing a USB Hub Hub adapter to 8 RS232 Serial Ports, or what could be the best solution

3

Open Discussion / Advenced HMI rs232 scale weighing

« on: September 08, 2023, 10:19:29 AM »

It would be possible with Advanced hmi to make the connection with a weighing scale to obtain the weight data by rs232, I need to communicate with 10 scales by serial port.
thanks if anyone has a solution

4

Support Questions / Re: Modbus TCP flowmeters

« on: August 28, 2019, 09:41:03 AM »

Hello Archie
The flowmeter protocol is modus rtu over TCP, there will be some possibility of achieving communication through AdvancedHMI
Thanks

5

Support Questions / Re: Modbus TCP flowmeters

« on: August 15, 2019, 04:36:22 PM »

ok Archie

6

Support Questions / Re: Modbus TCP flowmeters

« on: August 14, 2019, 06:25:25 PM »

Archie thanks for answering
It is a flowmeter that has a Lantronix port 10001 brand Ethernet port card installed, a port other than 502 can be used because I cannot receive the flowmeter data.

7

Support Questions / Modbus TCP flowmeters

« on: August 12, 2019, 05:46:37 PM »

Good afternoon
I have a flowmeter and I need to send the totalized data to a data base, the communication is modbus tcp, I cannot read the data, please if someone can help me addressing, I attach the manual thanks

Modbus register 152
Modbus address 151
No. of bytes   2
Data type      Float
Description   Float TOTAL
Read/ Write    R

8

Support Questions / MODBUS TCP

« on: August 12, 2015, 07:40:04 PM »

Cheers
I have 10 energy analyzers with Modbus TCP, I would draw analyzers measurements on a screen could be done with the Advanced HMI only to set the IP addresses of analyzers and access each of them by an alias, please your support.

9

Support Questions / MessageListByBit1 delete Items

« on: April 13, 2015, 12:25:14 PM »

How could delete items alarms than MessageListByBit1 when use MessageListByBit1.items.clear(), when an alarm appears below does not appear in MessageListByBit1

Thanks for help

10

Support Questions / Re: write values into a floating F8:

« on: April 12, 2015, 04:45:42 PM »

archie thanks for your help

 please can you help me with additional questions, is I want to write the value of Variable  Df1com1.write("f8:0", variable)... so serious but not, please Might by help

 thanks
 regards

11

Support Questions / Re: write values into a floating F8:

« on: April 11, 2015, 09:34:58 AM »

ARCHIE THANKS FOR REPLY
 I CAN  READ DIRECTLY BY DF1COM.READ (F8: 6), HE TRIED TO DF1COM.WRITE (F8: 10) A ERROR  MISTAKE BUT LEAVES ME, I WANT TO WRITE WITHOUT USING DATA INTERFACE,
THANKS FOR YOUR SUPPORT.

12

Support Questions / write values into a floating F8:

« on: April 10, 2015, 01:26:37 PM »

GREETINGS TO YOU:
 HOW TO WRITE A VALUE FOR EXAMPLE IN A FLOATING BY DF1 MICROLOGIX 1200

 THANK YOU