AdvancedHMI Software
General Category => Additional Components => Topic started by: Archie on March 15, 2018, 11:48:20 AM
-
This is a n updated control that will be in a future version, but I wanted to put it out there for some initial testing.
- Download the attached file
- In Solution Explorer, expand down AdvancedHMIControls
- Right click the PurchasedControls folder and select Add Existing
- Browse to the attached file
- Expand down the Controls folder
- Right click the GraphicalInidcator.vb and select View Code
- On line 7 , change the Inherits line to this
Inherits GraphicIndicatorBase
-
Hey Archie, I'm not sure what the new control is supposed to do over the old one but I did notice that the entire area fills with the selected back color if either ValueSelect1 or 2 is set to true.
-
Attached is another update.
When the Background is set to Transparent and the graphic has transparent content, such as PNGs, it should let you overlap Indicators.
-
hello
can i make it to work for one address?
so graphic select 1 and graphic select 2
for one plc address
-
You can use the same address but graphic 2 will never show unless you use opposite states with NOT prefix.
The example could be address "00001" in the graphic select 1 and "NOT 00001" in the graphic select 2 (and vice versa).