Topics

1

Open Discussion / File I/O error with DataLogger2

« on: February 21, 2017, 04:47:40 PM »

Please look at the attached picture. Any ideas why I'm having this error.
No other program is accessing this file.

Thanks

2

Open Discussion / Datalogger2 missing seconds!

« on: February 09, 2017, 01:03:53 PM »

Hi,
I ran the Datalogger2 control for 4 hours in parallel with a Yokogawa chart recorder. 
When I compare the two files I saw there are 283 seconds (4.72 minutes) missing on the log file from Datalogger2 control......!
Missing seconds are randomly distributed through out the 4 hour period.
Any ides why this happens?

Thanks

3

Support Questions / ModbusTCP SendData DLL Instance not created

« on: December 30, 2016, 09:03:52 AM »

Everybody ,

I'm using the latest version & getting an error when I try to write a register.

Code: [Select]

ModbusTCPCom1.Write(40016, 100)
Below is the full error massage. Any ideas?

An exception of type 'MfgControl.AdvancedHMI.Drivers.Common.PLCDriverException' occurred in MfgControl.AdvancedHMI.Drivers.dll but was not handled in user code

Additional information: ModbusTCP SendData DLL Instance not created

Thanks,

4

Support Questions / Meter2 Control Scale problem

« on: December 29, 2016, 01:23:51 PM »

Hi everybody,

Check the below picture. I have a guage control, a meter control & a meter2 control on the latest version of AdvancedHMI.
The meter & guage control works with no issues. But the meter2 controls is off!!
The value displayed in the PLCAddressText does not match with the PLCAddressValue.
My ValueScaleFactor is 1 for all meters.
Any ideas??

5

Open Discussion / EthernetIPforCLXCom with Toshiba Drive

« on: November 03, 2015, 02:06:42 PM »

I could not find anything related to what I'm looking for so I started a new thread.

I'm trying to communicate with a Toshiba motor drive through EthernetIP.
Have anyone done this with EthernetIPforCLXCom?

Currently I have a ControlLogix communicating with this drive. Look at the picture for the settings.
I can read/write to the ControlLogix with Advanced HMI.
But how does AdvancedHMI drivers talk to the Drive directly (without the ControlLogix).