AdvancedHMI Software
General Category => Application Showcase => Topic started by: StephenSDH on April 07, 2014, 04:12:57 PM
-
Posting my project incase it helps anyone.
Cheers, Steve
Software Video
https://www.youtube.com/watch?v=qJofwi_G94I
Hardware Video
https://www.youtube.com/watch?v=dDYur311a_0
Files
https://www.dropbox.com/sh/hl8hrjmlqod6rij/EDpDHCHv5U
-
Nice work! Thanks for sharing in much detail.
-
Thanks for making to project available and for helping me out in the past.
- Steve
-
Thank you!
-
How did you integrate the password into the program?
I am a begginner at this and would love your help.
Thankyou,
Michael A. Gaudio
-
Michael,
I posted all the code for both the PLC and AdvancedHMI application.
It is a little complicated if you are new to PLC and .Net programming. The security validation is in the PLC logic. The operator enters a numeric value through AdvancedHMI. In the PLC confirms the entered password it turns on a bit. The data entry control I modified only allows data entry if the PLC bit is true.
It might be a little too complicated, but I posted all the code if you want to copy it.
Good Luck,
Steve
-
Steve - GREAT video of system. Seems to be well thought out and I like the added touch of making the drawings directly available to the operator.
Thanks for posting it.
David
-
Had some PMs to repost the code. The project is fairly old at this point. I would download the latest code and not use this, but here it is.
https://www.dropbox.com/sh/cbk2slqdqg2jnei/AAAd9z5dd3q73mj88Jkq30wwa?dl=0