Topics

1

Support Questions / Expansion Packs Install ERRORS

« on: May 20, 2016, 03:59:00 AM »

Archie,

AHMI 339f

Expansion Packs:
Dials and Sliders
Flow Arrow Pack
Meter and Button Pack (BeveledButtonDisplay and LinearMeterV installed ok)
MeterPack

I get the following messages:
Flow Arrow:

Error   1   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowHatched.vb   125   17   AdvancedHMIControls
Error   2   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowMatrix1.vb   125   17   AdvancedHMIControls
Error   3   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowMatrix2.vb   125   17   AdvancedHMIControls
Error   4   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowSolid.vb   125   17   AdvancedHMIControls
Error   5   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowStriped.vb   125   17   AdvancedHMIControls

Flow Arrow Pack:

Error   1   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowHatched.vb   125   17   AdvancedHMIControls
Error   2   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowMatrix1.vb   125   17   AdvancedHMIControls
Error   3   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowMatrix2.vb   125   17   AdvancedHMIControls
Error   4   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowSolid.vb   125   17   AdvancedHMIControls
Error   5   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\FlowArrowStriped.vb   125   17   AdvancedHMIControls


Dials and Sliders:

Error   1   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\AnalogDial.vb   207   17   AdvancedHMIControls
Error   2   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\ThumbDial.vb   209   17   AdvancedHMIControls
Error   3   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\TrackBar.vb   220   17   AdvancedHMIControls
Error   4   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\VerticalSlide.vb   207   17   AdvancedHMIControls
Error   5   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   J:\HMI Projects\__AHMI Project-3\AdvancedHMIControls\PurchasedControls\VerticalSlide3.vb   207   17   AdvancedHMIControls


Seems as if I had this problem before..

Ideas,Solutions?

I've done the completely clean solution and controls solution routine.

Please Advise

Thanks
Malt

2

Support Questions / BevelButtonDisplay

« on: May 19, 2016, 10:28:46 PM »

I swear I have/had the bevelbuttondisplay, but I cannot for the life of me find it.

Is this a purchasedcontrol?

malt

3

Support Questions / Quick Start Digital Meter

« on: May 11, 2016, 12:59:00 AM »

I know I have had this working several versions ago but now I'm stumped.

I am running VS 2013, AHMI 399e, RSLogix 500 and RSLinx 2.58 Release 4.
My choices under RSWho are:
00, Workstation,DF1-COM1 
or
01,Micrologix1000,ML1000

AHMI is configured as in Archie's video. And RS is configured as in the same video.

See the attached images.

I have tried with and without running RSLinx, but to no avail


Any help or instructions/corrections will be greatly appreciated.

TIA
malt

4

Support Questions / Purchased Controls add errors

« on: May 08, 2016, 02:21:50 AM »

I just removed VS 2015 and installed VS 2013 Pro.
When I try and add my purchased controls, I get the following errors:

Error   1   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   C:\_____VS 2013 AHMI\AdvancedHMIControls\PurchasedControls\DigitalPanelMeterBlue.vb   170   17   AdvancedHMIControls
Error   2   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   C:\_____VS 2013 AHMI\AdvancedHMIControls\PurchasedControls\LinearMeterHoriz.vb   230   17   AdvancedHMIControls
Error   3   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   C:\_____VS 2013 AHMI\AdvancedHMIControls\PurchasedControls\LinearMeterVert.vb   236   17   AdvancedHMIControls
Error   4   'CommComponent' is not a member of 'AdvancedHMIControls.SubscriptionHandler'.   C:\_____VS 2013 AHMI\AdvancedHMIControls\PurchasedControls\NumericSevenSegment.vb   170   17   AdvancedHMIControls

I get these error for each pack I have purchased.
Are these expansion packs not compatible with VS 2013 PRO?

Thanks
malt

5

Support Questions / VS Community 2013

« on: May 05, 2016, 08:51:10 PM »

Is VS 2013 Community recommended over VS 2015?

TIA
Malt

6

Support Questions / DF1 Driver? Not showing

« on: May 03, 2016, 12:57:17 AM »

I have 399e installed, win 7 VS 2015. When I add the digital panel meter and scroll to the ComComponet, The only choice I have is: EthernetIPforCLXCom1.
What ComComponet do I need and how to set it up and include it in the ToolBox.? I am using an AB ML1000 thru my serial port.

TY Lwciak aka maltmaster

7

Support Questions / Visual Studio 2015 or AHMI 399d Problem ?

« on: April 07, 2016, 05:35:46 PM »

Hi,
Not sure wherein the problem lies.
I keep getting this error message: See the attached.

Also, I'm getting the error message that:
"cannot find the .pdb file.
and lastly, after I have all the required .DLL's in the correct directory I get the "cannot find the "...library"
When I go to the folder they have been deleted.

A nasty virus?
Bad setup?
Please point me in the right direction and your thoughts.
I've run Nortons but nothing shows up.
I've also deleted and reinstalled VS as well as use a clean AHMI .sln

Many thanks..
lwciak aka maltmaster

8

Support Questions / How to create a new AHMI solution

« on: April 05, 2016, 04:16:41 AM »

Hi all,
Please don't pelt me with rocks for the question:

I want to build several different AHMI apps.
I am stuck as how to save my current sln and then close it then open a new AHMI SLN (blank of course). I am using MS Visual 2015.
Is there a setting to "save as" the current SLN and then open a new SLN? In other words, how to save say AHMI 1 then create an AHMI 2.
I'm using AHMI 399d

I've been through the documentation and help files but found nothing.
I must be really missing something.
Any help or pointers to solve this issue will get you my first born
TIA

LWC aka maltmaster

9

Support Questions / v3.99d Failed to get processor type - Line 429

« on: March 30, 2016, 04:37:09 AM »

Try this work around that bypasses the process of fetching the processor type

Sir Arthur & Members of the Court 
Two issues:

• I get the above error when I try and run the "MotorControlAppMicroLogix" listed in the documents section.
• In the MOV instruction, same document, RUNG 0001, I enter the Destination address as shown(O:0.3), but get the error "Address must be specified to the word level"

I have followed the directions you gave me in a previous older post as listed below:

1) Under the AdvancedHMIDrivers project in Solution Explorer, open AllenBradletPCCC.vb
2) go to line 429
3) Insert the line of code "Return &H58" as shown below:
Code: [Select]

    Public Function GetProcessorType() As Integer
        Return &H58

        If m_ProcessorType <> 0 Then

When I follow the above instructions, that code doesn't exist. Am I not doing it right?

Would you please verify or explain the MOV issue I described?
TIA
Larry C aka maltmaster, lwciak

10

Support Questions / Attached files downloads - how to?

« on: August 28, 2015, 11:14:02 PM »

Hi all,
I do make good use of the forums and have done so for a few years. Now I am stumped! When a post says see attached files, or download attached files, I see nowhere to download the files in the post. Did, or am I still waiting for a bus that has left.
How do I do it?
TIA
LarryC aka malt