AdvancedHMI Software

General Category => Support Questions => Topic started by: CarlosGranados on January 20, 2018, 02:55:25 PM

Title: Pilot Lights Problems
Post by: CarlosGranados on January 20, 2018, 02:55:25 PM

Hi Guys!

Im using Pilots Lights with diferents PLCAdressValue (I:0/0,I:0/1,I:0/2, Etc) but when i run the program and i activate an input, every lamp start flashing with green color.

do you know whats going on?

EDIT*
The same problem happens with the basic labels, if i use adress of inputs (I:0/0,I:0/1,I:0/2, Etc), when i activate any input, the labels appear and disappear every halfsecond.

Title: Re: Pilot Lights Problems
Post by: Archie on January 20, 2018, 05:32:54 PM

There is a known issue with the SLCMicro driver and reading I/O addresses. You will need to use B or N addresses until a fix for the driver is released.