AdvancedHMI Software
General Category => Application Showcase => Topic started by: Archie on July 14, 2014, 07:59:03 PM
-
I just wanted to start to compile the Youtube videos of AdvancedHMI applications. If you know of any more share them with us!
https://www.youtube.com/watch?v=Yw8rhZ8Z5MM
https://www.youtube.com/watch?v=LYPmNPIY4IY
https://www.youtube.com/watch?v=iXHfhHFcrCQ
https://www.youtube.com/watch?v=XlTzaYHu5Ds
https://www.youtube.com/watch?v=PA1yJ4G2Lg8
-
http://www.youtube.com/watch?v=V-9Uxth3Xqo
-
https://www.youtube.com/watch?v=jFjrR124uLA
-
https://www.youtube.com/watch?v=5GYjA_VTaHM
-
A video on using AdvancedHMI on a PC and a Raspberry Pi as ModbusTCP IO
https://www.youtube.com/watch?v=DhkBVPBgBD0
-
https://www.youtube.com/watch?v=In_W5SyWWBU (https://www.youtube.com/watch?v=In_W5SyWWBU)
Regards,
Garry
www.accautomation.ca (http://www.accautomation.ca)
-
Create a PLC with HMI Training and Learning Enviroment Free
https://www.youtube.com/watch?v=1rWI-A-nZdo (https://www.youtube.com/watch?v=1rWI-A-nZdo)
http://accautomation.ca/create-a-plc-with-hmi-training-and-learning-environment-free/ (http://accautomation.ca/create-a-plc-with-hmi-training-and-learning-environment-free/)
Regards,
Garry
www.accautomation.ca (http://www.accautomation.ca)
-
https://youtu.be/00Ka8-AbAWA
-
A small home automation project I been tinkering with
https://youtu.be/YBhX7msyT4A
-
Another home automation video featuring AHMI
https://www.youtube.com/watch?v=vvfrnNE-_UA
-
https://www.youtube.com/watch?v=VuQCGCNC-q4
-
I just happened to be researching information on Yaskawa servo setup and noticed a familiar software at 4:35
https://www.youtube.com/watch?v=iQssl583USs
I am guessing they are using Modbus communications.
-
The controls appears to be the same as yours. I would download their MotionWorks and see if they are using your driver. If so, send them a cease and desist letter
https://www.yaskawa.com/products/motion/machine-controllers/software-tools/motionworks-iec/-/content/_32b77949-e618-4aa6-a9d4-6454a55a6ea6_MotionWorksIEC
-
The controls appears to be the same as yours. I would download their MotionWorks and see if they are using your driver. If so, send them a cease and desist letter
https://www.yaskawa.com/products/motion/machine-controllers/software-tools/motionworks-iec/-/content/_32b77949-e618-4aa6-a9d4-6454a55a6ea6_MotionWorksIEC
I think they created a separate application using AdvancedHMI. It is the program he referred to as Remote IO. I used MotionWorks a few years ago and don't remember any kind of HMI being part of it. Maybe a comment needs to be put on the video asking where the Remote IO came from to see if they acknowledge the use of AdvancedHMI>
-
Video showing AdvancedHMI with an Siemens PLC by using KEPServer:
https://www.youtube.com/watch?v=uvABrhrV1Dg
-
Video showing how to use raw serial port communications to display data from an Arduino
https://www.youtube.com/watch?v=y5O6nHqRJa4
-
Using AdvancedHMI with Delta DVP PLC
https://www.youtube.com/watch?v=BpoNkyQ31y4
-
If you understand Korean, here is a video that mentions AdvancedHMI
https://www.youtube.com/watch?v=KemyPbxgvYo
-
If you understand Korean, here is a video that mentions AdvancedHMI
https://www.youtube.com/watch?v=KemyPbxgvYo
It's a lot more entertaining if you turn on subtitles and auto translate to English.
-
If you understand Korean, here is a video that mentions AdvancedHMI
https://www.youtube.com/watch?v=KemyPbxgvYo
It's a lot more entertaining if you turn on subtitles and auto translate to English.
That is hilarious. Some of the translated random gibberish actually forms comical sentences. I never knew of the automatic subtitle and translation capability on Youtube.
-
Frequently I refer to AdvancedHMI as being fast. This of course can apply to several different aspects, such as fast development time, fast/responsive running, fast communications, etc. To demonstrate one aspect of what I mean by fast, I made a short video clip showing the refresh rate of a screen from a project I recently deployed. This demo shows the position of a hydraulic cylinder as it moves.
https://www.youtube.com/watch?v=XplLbZuOWTg
The PollRateOverride is set to 50ms. I originally had it updating faster, but when it gets to the point that is faster than any person can make sense of the numbers, it unnecessarily uses CPU and network bandwidth.
This application is running on an AdvancedHMI 15" panel PC.
-
If it's true 50ms, that's 20 frames per second. I agree it really doesn't need to be any faster than that.
-
https://www.youtube.com/watch?v=UGBRoHeJtyk
-
https://www.youtube.com/watch?v=ulwHis8lJTA&feature=youtu.be
-
https://www.youtube.com/watch?v=brL_Hx2Otpg
-
https://www.youtube.com/watch?v=brL_Hx2Otpg
Oddly enough, these Koreans guys must be eating too much of KimChi, there were several rolls of toilet paper :=)
-
Another one:
https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s
-
Another one:
https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s
For your speed test you may be able to tweak it more by experimenting with how high your device will let you increase MaxReadGroupSize. Also the beta version 3.99y has further improved performance of subscriptions.
-
Another one:
https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s
For your speed test you may be able to tweak it more by experimenting with how high your device will let you increase MaxReadGroupSize. Also the beta version 3.99y has further improved performance of subscriptions.
I made some extra tests with changing the MaxReadGroupSize property:
- 5 => for 100 tags - 6~7 reads/sec for 200 tags - 4 reads/sec
- 10 => for 100 tags - 10 reads/sec for 200 tags - 8~9 reads/sec
- 20 => for 100 tags - 20 reads / sec for 200 tags - 18 reads/sec
- 25 => for 100 tags - 25 reads/sec for 200 tags - 22 reads / sec
- 30 => for 100 tags - 28~29 reads/sec for 200 tags - some tags could not read
- 50 => for 100 tags - some tags are very slow to refresh
So with my device and my computer, if I wanna read about 200 tags simultaneously, the best results were achieved with a MaxReadGroupSize property of 25.
I will try to migrate to the latest version.
-
https://www.youtube.com/watch?v=su4euEKTxEI
-
https://www.youtube.com/watch?v=su4euEKTxEI
Nice....
-
https://www.youtube.com/watch?v=a2hiG1o_8bc