AdvancedHMI Software
General Category => Support Questions => Topic started by: rms on July 12, 2013, 02:13:33 PM
-
Hi. I got the following error(s) when trying to run a project... any help or guidance would be appreciated.
Please see attached screenshots which I could not place in this message box
Thanks in advance
-
Can you copy the full Stack Trace message from the message window in your last picture and post it?
-
Ok - Here it is..
There are only 3 screens...they were all linked and communicating with the SLC 5/05 with no issues or problems.
When I shut down yesterday... windows 7 performed an update and installed or updated 18 items - not sure, but maybe that update had something to do with these problems
Thanks a lot of looking into it.
Hopefully the info below is what you requested...
System.TypeInitializationException was unhandled
Message=The type initializer for 'System.Net.ComNetOS' threw an exception.
Source=System
TypeName=System.Net.ComNetOS
StackTrace:
at System.Net.Sockets.Socket.InitializeSockets()
at System.Net.Sockets.Socket.get_OSSupportsIPv4()
at System.Runtime.Remoting.Channels.Tcp.TcpServerChannel..ctor(IDictionary properties, IServerChannelSinkProvider sinkProvider, IAuthorizeRemotingConnection authorizeCallback)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.RegisterChannel(ChannelType ChannelType, Boolean ChannelIsSecure)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at MfgControl.AdvancedHMI.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
InnerException: System.Configuration.ConfigurationErrorsException
Message=An error occurred creating the configuration section handler for system.diagnostics: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.TraceSection..ctor()' failed. (C:\Users\Rich\Downloads\AdvancedHMIBetaV340\AdvancedHMI\bin\Debug\AdvancedHMI.vshost.exe.Config line 3)
Source=System.Configuration
BareMessage=An error occurred creating the configuration section handler for system.diagnostics: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.TraceSection..ctor()' failed.
Filename=C:\Users\Rich\Downloads\AdvancedHMIBetaV340\AdvancedHMI\bin\Debug\AdvancedHMI.vshost.exe.Config
Line=3
StackTrace:
at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Configuration.ConfigurationManager.GetSection(String sectionName)
at System.Configuration.PrivilegedConfigurationManager.GetSection(String sectionName)
at System.Diagnostics.DiagnosticsConfiguration.Initialize()
at System.Diagnostics.DiagnosticsConfiguration.get_Sources()
at System.Diagnostics.TraceSource.Initialize()
at System.Net.Logging.InitializeLogging()
at System.Net.ComNetOS..cctor()
InnerException: System.MethodAccessException
Message=Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.TraceSection..ctor()' failed.
Source=mscorlib
StackTrace:
at System.RuntimeMethodHandle.PerformSecurityCheck(Object obj, RuntimeMethodHandleInternal method, RuntimeType parent, UInt32 invocationFlags)
at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean skipCheckThis, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Configuration.TypeUtil.CreateInstanceRestricted(Type callingType, Type targetType)
at System.Configuration.ConfigurationElement.CreateElement(Type type)
at System.Configuration.ConfigurationElement.get_Item(ConfigurationProperty prop)
at System.Configuration.ConfigurationElement.Reset(ConfigurationElement parentElement)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.CreateSectionImpl(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentConfig, ConfigXmlReader reader)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.CreateSectionWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentConfig, ConfigXmlReader reader)
at System.Configuration.RuntimeConfigurationRecord.CreateSection(Boolean inputIsTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentConfig, ConfigXmlReader reader)
at System.Configuration.BaseConfigurationRecord.CallCreateSection(Boolean inputIsTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentConfig, ConfigXmlReader reader, String filename, Int32 line)
InnerException: System.Security.SecurityException
Message=Request failed.
Source=mscorlib
GrantedSet=<PermissionSet class="System.Security.PermissionSet"
version="1">
<IPermission class="System.Security.Permissions.FileDialogPermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Access="Open"/>
<IPermission class="System.Security.Permissions.IsolatedStorageFilePermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Allowed="ApplicationIsolationByUser"
UserQuota="1024000"/>
<IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Flags="Execution"/>
<IPermission class="System.Security.Permissions.UIPermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Window="SafeTopLevelWindows"
Clipboard="OwnClipboard"/>
<IPermission class="System.Drawing.Printing.PrintingPermission, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
version="1"
Level="SafePrinting"/>
<IPermission class="System.Security.Permissions.MediaPermission, WindowsBase, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
version="1"
Audio="SafeAudio"
Video="SafeVideo"
Image="SafeImage"/>
<IPermission class="System.Security.Permissions.WebBrowserPermission, WindowsBase, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
version="1"
Level="Safe"/>
</PermissionSet>
PermissionState=<PermissionSet class="System.Security.PermissionSet"
version="1"
Unrestricted="true"/>
RefusedSet=""
Url=""
StackTrace:
at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object demand, IPermission permThatFailed)
at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean throwException)
at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)
at System.Security.PermissionListSet.CheckSetDemand(PermissionSet pset, RuntimeMethodHandleInternal rmh)
at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)
at System.Security.CodeAccessSecurityEngine.ReflectionTargetDemandHelper(Int32 permission, PermissionSet targetGrant)
InnerException:
-
I tried to reproduce this, but no luck. By searching the internet, it looks like many others have had this problem.
The next thing we need to check is the config file. Go into this directoty in your project AdvancedHMI\bin\Debug and open the file AdvancedHMI.vshost.exe.config with notepad. Post the contents of that file and I'll see if anything stands out in that.
One other thing to try that sometimes resolves strange issues is to delete both the \obj and \bin directories in the AdvancedHMI folder and the AdvancedHMIDrivers folder. Once you open the project again, Visual Studio will rebuild those folders and files.
-
Hi.. thanks a lot for replies thus far.... here is the content of AdvancedHMI.vshost.exe.config as requested...
<?xml version="1.0"?>
<configuration>
<system.diagnostics>
<sources>
<!-- This section defines the logging configuration for My.Application.Log -->
<source name="DefaultSource" switchName="DefaultSwitch">
<listeners>
<add name="FileLog"/>
<!-- Uncomment the below section to write to the Application Event Log -->
<!--<add name="EventLog"/>-->
</listeners>
</source>
</sources>
<switches>
<add name="DefaultSwitch" value="Information"/>
</switches>
<sharedListeners>
<add name="FileLog" type="Microsoft.VisualBasic.Logging.FileLogTraceListener, Microsoft.VisualBasic, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL" initializeData="FileLogWriter"/>
<!-- Uncomment the below section and replace APPLICATION_NAME with the name of your application to write to the Application Event Log -->
<!--<add name="EventLog" type="System.Diagnostics.EventLogTraceListener" initializeData="APPLICATION_NAME"/> -->
</sharedListeners>
</system.diagnostics>
<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/></startup></configuration>
I will also delete the \obj and \bin files as suggested and report back shortly.
Thanks!
-
OK...I deleted the \obj and \bin files and restated, got a bunch of error screens, rebuilt, then run the program and got the same System.Net.ComNetOS exception error
If you have any other ideas or come up with anything please advise
How about...saving my work (not sure which files that would be...I assume it's the .vb files- anything else??) and then uninstalling VB and AdvancedHMI, installing everything again, build AdvancedHMI, load my files (saved before) and see what happens
Does not get to the root of the problem, but may get me up and running again. Any value in this?
Thanks
-
Nothing stands out with the config file. What if you start with a blank AdvancedHMI project and try to run it without adding anything? If that fails, then maybe try re-installing the .NET framework.
-
ok...i'll do that.. I'm not a VB programmer, but am learning as I go... how to I get to a "blank" Advanced HMI project opened???
Right now, when I select AdvancedHMIv3 from recent projects and it opens to my current project which is giving the errors discussed so far
How to I create a new "project" or "solution" or whatever it's called in AdvancedHMI that does NOT default to my current project. OR How do I open a "blank" project within Advanced HMI
Sorry it's such a basic question, I can't seem to figure out how to do it.
Thanks for your help
-
The easiest way is to download a fresh copy and extract it into a new folder.
-
Ok. I tried installing vb 2010 express - no luck - same problem,.. what's interesting is that it seemed to remember that I had AdvancedHMI loaded as a recent file - so that leads me to believe the VB2010 express did not "fully" uninstall - some files were left behind and recaptured on re-install - that could be part of the problem
Then I download and fresh copy of AdvancedHMI, installed and tried to run (debug)...got same exact error
It's probably some setting or something unique about my PC.
I'm going to try to run Advanced HMI on another pc, as soon as I can get one, and see what happens. Could be a while.
If you have any other ideas, Like - how to "completely" uninstall and reinstall VB or anything else to try... I'm willing to try anything right now
I really want this to work. For the few days that AdvancedHMI was working - I really liked it and saw many uses and applications for it.
Thanks for your help
-
I think the problem is more in the .NET framework than in Visual Studio. Try going to Microsoft's download section to re-download and install .NET 4.0
Even when you uninstall and re-install Visual Studio, the .NET framework stays untouched. It really sounds like there was a security update to .NET that is causing the issue.
-
Ok.. I'll try that... one more thing.. should I uninstall .net 4.0 and then re-install or just re-install right "on top of" the existing installation. thanks a lot
-
Someone else had some problems after that recent update from Microsoft. You will most likely need to uninstall the framework then reinstall to make sure it does not apply the updates.
-
OK. Did a complete VB2010 Express Uninstall and a complete .net 4.0 uninstall and then re-installed everything and got it working.
Now, how to I disable all windows updates or how do I know which ones NOT to apply - right now...I think the updates are automatic when I shut down...no prompt or anything.. I[m asking just so I don't accidentally trigger and update. Thanks
-
If you are on Windows 7, you can click your start button, then type "windows update", click on Windows Update which will take you to a window with an option on the left to Change Settings. From there you can set it to only notify you so you can select which updates to install. Just avoid the security update for .NET 4
-
ok - did it. thanks... Attached is a screen shot of all the updates that have NOT been applied to my Win 7 OS. with out these updates installed...AdvancedHMI works fine. This may be useful if you want to try to narrow down which one or ones of these is causing the problem. Please let me know if you determine which, if any, updates I can safely install w/o compromising AdvancedHMI. Thanks
-
Going by the release dates of the patches, I am guessing it is on of the ones that start with KB28 because they were the only ones released in July.
I won't guarantee it, but I would guess that it is safe for you to install the updates prior to the KB28******* ones.
Looking on my PC, I do not show the need for those updates. However I have .NET 4.5 installed. So maybe installing 4.5 avoids the need for the updates.
-
So it appears there are a few reports of issues caused by KB2840628 update. Here is one such case:
https://connect.microsoft.com/VisualStudio/feedback/details/793500/sqlclr-typeinitializationexception-in-sqlconnection-since-kb2840628
-
Ok. thanks. I'll think about how to proceed. I'll just keep things as they are for now. Maybe I'll upgrade to 4.5 at some time in the future. Thanks
-
The 4.5 is an in place install that doesn't affect anything with any of your projects. It is more of an extension to 4.0