AdvancedHMI Software
General Category => Open Discussion => Topic started by: ceidson on October 27, 2017, 07:40:32 AM
-
I use the BasicButton almost exclusively, mainly for cosmetic purposes. Most of them are being used as a momentary button by setting OutputType to MomenarySet. I also have the MinimumHoldTime set to 1.
Is there a trick to make the button more responsive for tasks, such as jogging servos? Does the momentary button have any advantage that I do not see?
-
The response of the button is mostly dependent on the driver you use. For example, the EthernetIPforCLXCom will respond on an average of 5-10ms. But a serial driver may take up to 50ms. The speed of the PC also plays some factor.
-
How are you gauging the speed? If you are using highlight or another form of feedback that could be misleading. Even on a half second clx driver, I'm seeing almost immediate response. I'm using real world field devices as the judge. Even with immediate field device response, the highlight is lagging.