AdvancedHMI Software

General Category => Application Showcase => Topic started by: Archie on July 14, 2014, 07:59:03 PM

Title: AdvancedHMI Videos
Post by: Archie on July 14, 2014, 07:59:03 PM: I just wanted to start to compile the Youtube videos of AdvancedHMI applications. If you know of any more share them with us!

https://www.youtube.com/watch?v=Yw8rhZ8Z5MM

https://www.youtube.com/watch?v=LYPmNPIY4IY

https://www.youtube.com/watch?v=iXHfhHFcrCQ

https://www.youtube.com/watch?v=XlTzaYHu5Ds

https://www.youtube.com/watch?v=PA1yJ4G2Lg8
Title: Re: AdvancedHMI Videos
Post by: singh_schneider on October 15, 2014, 12:37:20 AM: http://www.youtube.com/watch?v=V-9Uxth3Xqo
Title: Re: AdvancedHMI Videos
Post by: Archie on November 29, 2014, 08:32:36 AM: https://www.youtube.com/watch?v=jFjrR124uLA
Title: Re: AdvancedHMI Videos
Post by: Archie on May 28, 2015, 08:05:05 AM: https://www.youtube.com/watch?v=5GYjA_VTaHM
Title: Re: AdvancedHMI Videos
Post by: Archie on September 23, 2015, 08:30:57 PM: A video on using AdvancedHMI on a PC and a Raspberry Pi as ModbusTCP IO

https://www.youtube.com/watch?v=DhkBVPBgBD0
Title: Re: AdvancedHMI Videos
Post by: Garry on February 23, 2016, 06:20:57 PM: https://www.youtube.com/watch?v=In_W5SyWWBU (https://www.youtube.com/watch?v=In_W5SyWWBU)

Regards,
Garry
www.accautomation.ca (http://www.accautomation.ca)
Title: Re: AdvancedHMI Videos
Post by: Garry on February 23, 2016, 06:46:27 PM: Create a PLC with HMI Training and Learning Enviroment Free

https://www.youtube.com/watch?v=1rWI-A-nZdo (https://www.youtube.com/watch?v=1rWI-A-nZdo)

http://accautomation.ca/create-a-plc-with-hmi-training-and-learning-environment-free/ (http://accautomation.ca/create-a-plc-with-hmi-training-and-learning-environment-free/)

Regards,
Garry
www.accautomation.ca (http://www.accautomation.ca)
Title: Re: AdvancedHMI Videos
Post by: Archie on May 01, 2016, 08:07:30 AM: https://youtu.be/00Ka8-AbAWA
Title: Re: AdvancedHMI Videos
Post by: StefanA on May 08, 2016, 08:08:53 AM: A small home automation project I been tinkering with

https://youtu.be/YBhX7msyT4A
Title: Re: AdvancedHMI Videos
Post by: StefanA on May 09, 2016, 01:16:26 PM: Another home automation video featuring AHMI

https://www.youtube.com/watch?v=vvfrnNE-_UA
Title: Re: AdvancedHMI Videos
Post by: Archie on June 05, 2016, 09:16:02 PM: https://www.youtube.com/watch?v=VuQCGCNC-q4
Title: Re: AdvancedHMI Videos
Post by: Archie on October 31, 2017, 09:39:08 AM: I just happened to be researching information on Yaskawa servo setup and noticed a familiar software at 4:35

https://www.youtube.com/watch?v=iQssl583USs

I am guessing they are using Modbus communications.
Title: Re: AdvancedHMI Videos
Post by: bachphi on October 31, 2017, 12:40:02 PM: The controls appears to be the same as yours. I would download their MotionWorks and see if they are using your driver. If so, send them a cease and desist letter

https://www.yaskawa.com/products/motion/machine-controllers/software-tools/motionworks-iec/-/content/_32b77949-e618-4aa6-a9d4-6454a55a6ea6_MotionWorksIEC
Title: Re: AdvancedHMI Videos
Post by: Archie on October 31, 2017, 01:02:02 PM: Quote from: bachphi on October 31, 2017, 12:40:02 PM
The controls appears to be the same as yours. I would download their MotionWorks and see if they are using your driver. If so, send them a cease and desist letter

https://www.yaskawa.com/products/motion/machine-controllers/software-tools/motionworks-iec/-/content/_32b77949-e618-4aa6-a9d4-6454a55a6ea6_MotionWorksIEC
I think they created a separate application using AdvancedHMI. It is the program he referred to as Remote IO. I used MotionWorks a few years ago and don't remember any kind of HMI being part of it. Maybe a comment needs to be put on the video asking where the Remote IO came from to see if they acknowledge the use of AdvancedHMI>
Title: Re: AdvancedHMI Videos
Post by: Archie on February 28, 2018, 02:18:09 PM: Video showing AdvancedHMI with an Siemens PLC by using KEPServer:

https://www.youtube.com/watch?v=uvABrhrV1Dg
Title: Re: AdvancedHMI Videos
Post by: Archie on March 05, 2018, 12:21:40 PM: Video showing how to use raw serial port communications to display data from an Arduino

https://www.youtube.com/watch?v=y5O6nHqRJa4
Title: Re: AdvancedHMI Videos
Post by: Archie on March 26, 2018, 08:46:49 AM: Using AdvancedHMI with Delta DVP PLC

https://www.youtube.com/watch?v=BpoNkyQ31y4
Title: Re: AdvancedHMI Videos
Post by: Archie on April 07, 2018, 10:27:11 AM: If you understand Korean, here is a video that mentions AdvancedHMI

https://www.youtube.com/watch?v=KemyPbxgvYo
Title: Re: AdvancedHMI Videos
Post by: dmroeder on April 07, 2018, 12:44:27 PM: Quote from: Archie on April 07, 2018, 10:27:11 AM
If you understand Korean, here is a video that mentions AdvancedHMI

https://www.youtube.com/watch?v=KemyPbxgvYo

It's a lot more entertaining if you turn on subtitles and auto translate to English.
Title: Re: AdvancedHMI Videos
Post by: Archie on April 07, 2018, 03:22:23 PM: Quote from: dmroeder on April 07, 2018, 12:44:27 PM
Quote from: Archie on April 07, 2018, 10:27:11 AM
If you understand Korean, here is a video that mentions AdvancedHMI

https://www.youtube.com/watch?v=KemyPbxgvYo

It's a lot more entertaining if you turn on subtitles and auto translate to English.
That is hilarious. Some of the translated random gibberish actually forms comical sentences. I never knew of the automatic subtitle and translation capability on Youtube.
Title: Re: AdvancedHMI Videos
Post by: Archie on April 09, 2018, 09:00:04 AM: Frequently I refer to AdvancedHMI as being fast. This of course can apply to several different aspects, such as fast development time, fast/responsive running, fast communications, etc. To demonstrate one aspect of what I mean by fast, I made a short video clip showing the refresh rate of a screen from a project I recently deployed. This demo shows the position of a hydraulic cylinder as it moves.

https://www.youtube.com/watch?v=XplLbZuOWTg

The PollRateOverride is set to 50ms. I originally had it updating faster, but when it gets to the point that is faster than any person can make sense of the numbers, it unnecessarily uses CPU and network bandwidth.

This application is running on an AdvancedHMI 15" panel PC.
Title: Re: AdvancedHMI Videos
Post by: Phrog30 on April 09, 2018, 10:22:39 AM: If it's true 50ms, that's 20 frames per second. I agree it really doesn't need to be any faster than that.
Title: Re: AdvancedHMI Videos
Post by: Archie on May 13, 2018, 09:28:22 PM: https://www.youtube.com/watch?v=UGBRoHeJtyk
Title: Re: AdvancedHMI Videos
Post by: prof-nova on June 20, 2018, 05:01:51 PM: https://www.youtube.com/watch?v=ulwHis8lJTA&feature=youtu.be
Title: Re: AdvancedHMI Videos
Post by: Archie on June 21, 2018, 07:25:26 AM: https://www.youtube.com/watch?v=brL_Hx2Otpg
Title: Re: AdvancedHMI Videos
Post by: bachphi on June 21, 2018, 04:14:41 PM: Quote from: Archie on June 21, 2018, 07:25:26 AM
https://www.youtube.com/watch?v=brL_Hx2Otpg

Oddly enough, these Koreans guys must be eating too much of KimChi, there were several rolls of toilet paper :=)
Title: Re: AdvancedHMI Videos
Post by: prof-nova on June 25, 2018, 03:18:49 PM: Another one:

https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s
Title: Re: AdvancedHMI Videos
Post by: Archie on June 25, 2018, 04:27:23 PM: Quote from: prof-nova on June 25, 2018, 03:18:49 PM
Another one:

https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s
For your speed test you may be able to tweak it more by experimenting with how high your device will let you increase MaxReadGroupSize. Also the beta version 3.99y has further improved performance of subscriptions.
Title: Re: AdvancedHMI Videos
Post by: prof-nova on June 26, 2018, 03:25:18 AM: Quote from: Archie on June 25, 2018, 04:27:23 PM
Quote from: prof-nova on June 25, 2018, 03:18:49 PM
Another one:

https://www.youtube.com/watch?v=LhLZkZOxbNw&t=1s
For your speed test you may be able to tweak it more by experimenting with how high your device will let you increase MaxReadGroupSize. Also the beta version 3.99y has further improved performance of subscriptions.

I made some extra tests with changing the MaxReadGroupSize property:
- 5 => for 100 tags - 6~7 reads/sec for 200 tags - 4 reads/sec
- 10 => for 100 tags - 10 reads/sec for 200 tags - 8~9 reads/sec
- 20 => for 100 tags - 20 reads / sec for 200 tags - 18 reads/sec
- 25 => for 100 tags - 25 reads/sec for 200 tags - 22 reads / sec
- 30 => for 100 tags - 28~29 reads/sec for 200 tags - some tags could not read
- 50 => for 100 tags - some tags are very slow to refresh
So with my device and my computer, if I wanna read about 200 tags simultaneously, the best results were achieved with a MaxReadGroupSize property of 25.
I will try to migrate to the latest version.
Title: Re: AdvancedHMI Videos
Post by: Archie on November 01, 2019, 09:04:00 PM: https://www.youtube.com/watch?v=su4euEKTxEI
Title: Re: AdvancedHMI Videos
Post by: bob1371 on November 20, 2019, 02:59:56 AM: Quote from: Archie on November 01, 2019, 09:04:00 PM
https://www.youtube.com/watch?v=su4euEKTxEI

Nice....
Title: Re: AdvancedHMI Videos
Post by: Archie on November 20, 2019, 07:32:48 AM: https://www.youtube.com/watch?v=a2hiG1o_8bc