AdvancedHMI Software

General Category => Support Questions => Topic started by: oqapsking on April 19, 2017, 04:38:32 PM

Title: connect advance hmi to the hmi not to the plc
Post by: oqapsking on April 19, 2017, 04:38:32 PM

hello

can we connect advance hmi
with an hmi and not with the plc?

i have some delta dopB HMI with Ethernet

i use Eremote to connect them

but i don`t find it as good as advance hmi
for many reasons
the most important problem is
that Eremote connects to the hmi as a video
so it needs a strong internet connection on both sides

with thanks

Title: Re: connect advance hmi to the hmi not to the plc
Post by: bachphi on April 19, 2017, 05:12:58 PM

Correct me if I need a Google translator, you want to connect a laptop/PC to a DeltaDop HMI?

Title: Re: connect advance hmi to the hmi not to the plc
Post by: oqapsking on April 20, 2017, 02:59:00 AM

i have a delta plc and delta hmi
dopB is the type of the HMI witch have Ethernet in it

i want to connect the pc to the plc through the delta HMI

Title: Re: connect advance hmi to the hmi not to the plc
Post by: oqapsking on April 20, 2017, 03:14:39 AM

look at this video show how they use there Eserver software to read plc addresses values through the Ethernet connection in there hmi

https://www.youtube.com/watch?v=pdnp4j3LiRk

Title: Re: connect advance hmi to the hmi not to the plc
Post by: Archie on April 20, 2017, 08:42:27 AM

Wouldn't it be better to connect directly to the PLC using maybe the Modbus driver?

Title: Re: connect advance hmi to the hmi not to the plc
Post by: oqapsking on April 22, 2017, 04:28:47 AM

yes it is better but some of my projects already have the Ethernet in the hmi so i can`t just replace them or add an extension
 to the plc (matter of cost )