Messages

16

Open Discussion / Raspberry pi

« on: March 17, 2015, 05:56:03 PM »

Hi,

is there someone can help us about running AdvancedHMI on Raspberry pi,
what is the requirements ?
like visual basic 2010 or C#
and how to run AdvancedHMI on it step by step.

thanks

17

Support Questions / Re: Changing IP address at runtime

« on: March 17, 2015, 08:17:31 AM »

Hi,

thanks,

the new version it works good for changing ip address on run time.
but i have got another problem.
when using this driver EthernetIPforPLCSLCMicroCom1 as to communicate the micrologix 1100,
all the bush buttons when i click nothing is working with this new AdvancedHMI398.
if i use older versions when i click the buttons the lights come on and off, i mean works good.

so what is that problem plz with this new version.

thnks

18

Support Questions / Re: Changing IP address at runtime

« on: March 13, 2015, 10:47:33 PM »

Hi,

am using AdvancedHMIv35,
and the error header title is "NullReferenceException was unhandled"
and pointing this line
 " AddHandler DLL(MyDLLInstance).DataReceived, AddressOf DataLinkLayer_DataReceived"


Thanks alot for your support.
Ibrahim

19

Support Questions / Re: Changing IP address at runtime

« on: March 13, 2015, 03:54:08 AM »

Hi,

i have tried chaning the ip address of my plc and got the program crashes.
and am using microllogix 1100, with this driver EthernetIPforPLCSLCMicroCom1

by clicking bush button, and this is the code
EthernetIPforPLCSLCMicroCom1.IPAddress = "192.168.1.70"

and also i have tried to use this

EthernetIPforPLCSLCMicroCom1.IPAddress = textbox1.text

both not helped me to change the ip address on run time.

so may you help me how is it possible i can change the ip on runtime plz.

thanks

20

Open Discussion / Re: Wireless Devices

« on: March 11, 2015, 03:02:52 AM »

Hi,

i have also test this tablet Acer 8" tablet W1-810-17FE
and its cheap in the market after you have advised me, as long as the tablet is full windows version.
i have tried and it works perfect.

but i have seen 1 problem this tablet if the hibernate mode option is not disabled the program crashes.
i have disabled it and works perfect.
or if the display option is active also i got this problem.

that is my experience i have seen since i came this field.

any comments about using the AdvancedHMI will be welcomed regarding windows 8 and what ever.

thanks alot

21

Open Discussion / Re: Wireless Devices

« on: March 10, 2015, 05:28:04 AM »

Hi,

Any comments plz

22

Open Discussion / Re: Wireless Devices

« on: February 24, 2015, 03:13:59 AM »

Hi There,

thanks AdvancedHMI community,
i am using AdvancedHMI with surface pro 2.
but i have got one problem about the charms bar, coz when I touch the touch screen the charms bar appears and can access other
programs, so can you help me about how i can stop the charms bar if you can plz. because i need to use it in a public place that the customers
to switch off/on the lights, but there is some people they touch and run other programs on the surface. so how can you help me about this plz
just what i need to run only the advancedhmi form on the surface. i dont need other programs to run on it.

and i have read alot about the charms bar on the internet but i didnt get articles helped me about this problem.

i hope the community will help me about this.

thanks alot again

23

Open Discussion / Re: Wireless Devices

« on: February 03, 2015, 08:31:13 AM »

Hi,

many thanks Archie,
may i know what you mean full version windows?
and am sorry about asking questions.

thanks

24

Open Discussion / Re: Wireless Devices

« on: February 03, 2015, 07:39:12 AM »

Hi Archie,

sorry for the questions, and thanks alot for your supporting the community(us).
may you help me if i can use other tablets like Lenovo Miix2 coz its cheaper than the surface pro 2.
coz Lenovo Miix2 its windows 8.1
so may i know if i can install the visual basic.
just advice plz.

thanks
Ibrahim

25

Open Discussion / Re: Wireless Devices

« on: February 02, 2015, 11:38:32 AM »

Hi,

thanks Archie alot for your support us.

may you tell me plz which version of visual basic you have used to install the surface pro?
is it surface pro 2 or surface pro 3.

coz am using my laptop visual studio express 2010.
that is why am asking.
 i can install the same version i have right now on the surface pro 2 or 3.
or i have to install visual studio express 2013 and can i use it with AdvancedHMI with the lates versions

thanks alot again

26

Open Discussion / Re: Wireless Devices

« on: February 01, 2015, 01:41:37 PM »

Thanks alot

27

Open Discussion / Re: Wireless Devices

« on: February 01, 2015, 09:40:46 AM »

Hi,

thanks alot,

what are the steps required when using the AdvancedHMI on microsoft surface pro 2.
could you help me about it plz.
and may i know if successed during your test.
coz i am planning to pay it, as to access the HMI through wireless by using the microsoft surface pro 2 or 3.
thnaks alot again.

Ibrahim

28

Open Discussion / Wireless Devices

« on: February 01, 2015, 09:13:04 AM »

Hi,

am new to this field, so i have a question if there is someone tried about it,
is there anyone tried AdvancedHMI application on Microsoft Surface pro 3.
because of why i am need it is, as to monitor the HMI on it. through wireless.
or is there some1 can give me how i can control the HMI for tablet or small devices through wireless.


i hope will get replies.

thanks alot

Ibrahim

29

Open Discussion / Re: HTTP protol or web interface

« on: December 09, 2014, 07:45:45 AM »

Hi,

how please if you can give me some idea

thanks

30

Open Discussion / HTTP protocol or web interface

« on: December 09, 2014, 05:32:29 AM »

Hi,

can AdvancedHMI support web interface please.
and if yes how please.

Thanks alot