Author Topic: CLX Driver  (Read 2540 times)

Darrell

  • Full Member
  • ***
  • Posts: 198
  • Electrician / PLC Technician
    • View Profile
CLX Driver
« on: May 04, 2015, 01:02:57 PM »
DigitalPanelMeter and label , when reading floating point value form CLX driver , all will flicker between some unknown value and  a good value,

have 3 panel meters reading temperatures and 2 labels reading temperature setpoints , what happens is that they will all continiously flip between ,
lets say 20 and 6.8976. All will show same value  - 398d seem to work fine, problem  the latest ver g

BevelButtonDisplay will not work now either, data type bool

Label will read timer values ok ,

Darrell

Archie

  • Administrator
  • Hero Member
  • *****
  • Posts: 5317
    • View Profile
    • AdvancedHMI
Re: CLX Driver
« Reply #1 on: May 04, 2015, 09:32:46 PM »
I tested this out, but not seeing a similar problem. Can you put your PLC into program mode and see if the problem is still there?

Darrell

  • Full Member
  • ***
  • Posts: 198
  • Electrician / PLC Technician
    • View Profile
Re: CLX Driver
« Reply #2 on: May 05, 2015, 02:47:42 PM »
Started a new HMI and added one digital panel meter , floating Point reads ok , Then I add the 2nd , I get the problem above , same thing in program mode, added a 2nd driver and fist meter reads ok , add a second and same problem ,
« Last Edit: May 05, 2015, 03:43:08 PM by Darrell »

pal

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
Re: CLX Driver
« Reply #3 on: May 05, 2015, 03:55:00 PM »
Darrel - I've had a similar problem with the display flashing with  3.98g and clx . I put it down to incompatability with vb2010 . Are you on 2010 ?

Paul

Archie

  • Administrator
  • Hero Member
  • *****
  • Posts: 5317
    • View Profile
    • AdvancedHMI
Re: CLX Driver
« Reply #4 on: May 05, 2015, 07:52:53 PM »
Is it two floating points? Are they in any kind of array or UDT?

Darrell

  • Full Member
  • ***
  • Posts: 198
  • Electrician / PLC Technician
    • View Profile
Re: CLX Driver
« Reply #5 on: May 05, 2015, 10:06:36 PM »
floating points , Are not any kind of array or UDT?  I'm using VB2010 , ill try a newer version to see it that is the problem.

Darrell

Darrell

  • Full Member
  • ***
  • Posts: 198
  • Electrician / PLC Technician
    • View Profile
Re: CLX Driver
« Reply #6 on: May 06, 2015, 09:57:41 AM »
Used vb 2012 and get same thing , everything flickers , even values from micro logix driver. . and control logix values do same as above, all in this HMI worked perfect in version d
 Darrell

Darrell

  • Full Member
  • ***
  • Posts: 198
  • Electrician / PLC Technician
    • View Profile
Re: CLX Driver
« Reply #7 on: May 09, 2015, 04:13:17 PM »
Forgot to mention that I tried it in program mode and same problem , appears to be every time it polls the PLC , I built a HMI that is polling only a MicroLogix 1400 and all is OK , when I add some components for Control Logix 5000 , everything flickers on/off , values from both PLC's.

Darrell

Archie

  • Administrator
  • Hero Member
  • *****
  • Posts: 5317
    • View Profile
    • AdvancedHMI
Re: CLX Driver
« Reply #8 on: May 09, 2015, 06:01:10 PM »
I've been doing a lot of different testing scenarios, but haven't yet been able to reproduce this on my setup.